Compressor sucks air through air inlet located at outer scroll.
Compression chamber goes smaller with rotary movement and trapped air is compressed.
Compression chamber becomes minimum volume at the center of the scroll and air is
pumped out through air outlet located at the center of scroll.
These, suction, compression & discharging, process is repeated continuously.
Innovation through Technology
Proprietary Tip Seal and Unique Scroll Wrap
Increased performance (low leakage)
Extended service intervals
High efficiency
Special Alumite Treatment
Extends scroll life
Limits life cycle cost
Environmentally Friendly
Oil-Less Design
Eliminates environmental emissions
Concerns natural resources
Industry Leading Sound
Quiet enclosure standard
Design for the minimization of leak paths
Energy Efficiency
Microprocessor Based Control
Provides the optimized package operation under varying condition.
Special Tip Seal Material
Provides hgh performance with high reliability by extremely low wear.
Versatility of Design
Control Design
Standard microprocessor control
Cycle control logic protects from rapid cycling
Space Saving
Unit is compact in overall dimension
Panel accessibility promotes space conservation
Long Maintenance Cycle With Long Life Consumable Parts
Compressor head replacement at every 10,000 hours or 4 years whichever comes
earlier.
Low Noise Level
Noise level is only 45dB[A] that is like in the library (1.5kW)
Oil-Free Rotary Screw
DSP NEXT Series (Single-Stage)
• 15kW-55kW
• Air-Cooled
• Water-Cooled
DSP NEXT Series (Two-Stage)
22kW-120kW
• Air-Cooled
45kW-240kW
• Water-Cooled
DSP Series (Two-Stage)
• 132kW-240kW
• Air-Cooled
SDS U Series (Two-Stage)
• 105kW-450kW
• Water-Cooled
BEBICON
Lubricated BEBICON
Features
High Performance
Free air delivery increased through high efficiency.
High Reliability
Temperature lowered with aluminum cylinder head and HITACHI's cooling fan.
High efficiency flapper valves employed for ling life of 10,000 hrs.
Compact and Light in Weight
Mounting area and weight reduced by aluminum cylinder head.
Easy to Maintain
Main spare parts designed the same as conventional type. Rings, connecting rod,
and
crank shaft (excluding high efficiency flapper valves).
Pressure gauge, pressure control devices and stop valves equipped in one
manifold.
Package Lubricated BEBICON
Features
Use of (NEW) PUSC system
The PUSC system allows efficient operation according to the air quantity used. A
semiconductor pressure sensor quickly detects a change in pressure, and the
microcomputer selects either "pressure switch" or "automatic unloader" system
automatically (patent pending).
Digital pressure indication
The microcomputer converts the signal from the pressure sensor for digital
display
of pressure.
High efficiency flapper valves employed for ling life of 10,000 hrs.
Compact and Light in Weight
Mounting area and weight reduced by aluminum cylinder head.
Easy to Maintain
Main spare parts designed the same as conventional type. Rings, connecting rod,
and
crank shaft (excluding high efficiency flapper valves).
Noise is reduced even more through the development of a cooling air
intake/exhaust
system.
A new vibration proof design that minimizes vibration to the exterior.
An "alarm" is standard-equipped that lets you know when to supply oil.
A space-saving design
Use of the PUSC system eliminates the need for a vertical type air tank that was
required with the former pressure switch system. (If a large volume of air is
needed
momentarily, then the vertical type air tank is recommended.)
Oil-Free BEBICON
Features
The high cooling head with improved cooling efficiency has increased the output
of
compressed air
The newly-developed flap valve and the air valve made entirely of stainless
steel
have increased the output of compressed air and improved the reliability of
compressor operation
The Heat Cut Piston Pin and the new-type Leak Cut Piston Ring have increased the
output of compressed air and improved the reliability of compressor operation
Package Oil-Free BEBICON
Features
V-type (Variable Speed Control)
Energy-saving! 15% *1
Power-saving (Constant-pressure control with Inverter)
Constant-pressure control system can keep discharge pressure in the range of +/-
0.03MPa of setting pressure and can control motor rotating speed in proportional
to
air consumption
VM Combi System:
Ideal power saving with the V-type and M-type BEBICON combined operation
Environmentally-friendly with oil free structure
Oil free air supply
No oil exchange program
Oil free drain
No oil contamination
Digital indication
Easy-to-see time counter provided as standard.
Simple operation by coordinated control of compressor and air dryer.(types with
built-in air dryer)
Pre-operation of the air dryer or simultaneous operation of the air dryer and
compressor can easily be selected by a single switch.
Conventional Type
Regardless of the mode of operation, the air dryer starts or stops automatically
according to the amount of air used, ambient temperature, etc.
If any abnormal condition occurs with the air dryer in operation, the compressor
and
air dryer are automatically stopped and the MAINTENANCE lamp lights.
Use of a smaller-sized air tank made it possible to design a more compact
compressor.
• 15kW-55kW
• Air-Cooled
• Water-Cooled
Vplus (VSD model): 7.5-160kW
Dual Control Model: 150kW
Stype (Fixed Speed Model): 125-240kW
• 132kW-240kW
• Air-Cooled
• 105kW-450kW
• Water-Cooled
